Installing a window I had been procrastinating on replacing.

Closed Captions (CC):
[Music]

I gave them my chicken bones now they're

shooting lasers at me we're getting

warmed up to me though we'll see if I

[Music]

don't cut these out after several weeks

all right got ólafur cut out I'm going

to swap to the drill real quick and

drill the holes and then I'll cut out

this center part of it all right got the

first one done out of the four next step

on it is to clean it up a little bit and

then I need to actually glue the layers

together and then probably continue to

clean it up a little bit just to remind

everyone this is what I'm trying to

replace here these fields that go around

the windows I'm gonna as I replace the

windows they need to have that on there

to get a good weather seal and I have to

do that to pretty much every window on

board so got my work cut out for me as

you can imagine the downside to all this

work is the not last check out now

produce so I'm gonna have to pull out

the vacuum and clean that up

there's no no wind today which is good

because it's sunny and I need to put

that window and finally after however

long it's been since I took it out so

that is what we will do put up some

plastic on the inside to help contain

the dust as I cut that out and you know

this is my bedroom so I'd rather not get

into sawdusty all right I've got the

panel cut out there but I need to clean

up the hole before I can fit a window in

there but that piece of plastic worked

great for containing all the dust

keeping it from filling up my bedroom so

this is why I was waiting for the good

weather because now I've got a gaping

hole in my bedroom and I don't want to

get water in here I've got that this

waterproofing stuff that I'm going to

put on on this wooden edge that is

exposed to help protect it from any

potential rot in the future yeah

[Music]

gripping solution has dried and I am now

ready to

put the window back a little bit of a

tight fit but I think it'll work so I'm

gonna put some silicone around the edge

and force it through and hopefully that

will work window is on and siliconed I'm

going to put the screws back in their

holes

next step is to seal the outside all

right well I've got this goopy stuff on

yeah that'll now go on the window there

is the window all sealed up ready for

rain I will probably later tomorrow the

silicone has set overnight so I got

these paper towels underneath the window

and I'm gonna hit it with an artificial

rainstorm to see if we got any leaking

going on hopefully not though I sealed

it up pretty well

gotta keep shooting it like this for a

few minutes get the water a chance to go

wherever it's gonna go

then we'll take a look at the inside

[Music]

so I got a little bit of water dripping

in right here coming through the seal on

the window which is not a bad place the

good news is there is no water coming in

through the backside which is so got

that going for me which is nice gonna

let it dry before I open the window and

then let the rest of that water in not

bad not bad all pretty pleased with the

results of that test

all right next on my list now that I've

got the bedroom panel knocked out is to

work on this one this entire one because

it is leaking a lot of water when it

rains so what I'm gonna do is probably

go ahead and start measuring out the

shape of that panel and then cut it and

color it that way I don't have to leave

these windows out for very long I can

just do it all and hopefully it won't be

like the bedroom where I had it

uncovered for about six months before I

actually finished it so yeah I might if

that goes quickly I'll move on to the

panel on the starboard side and I might

redo the one up here that I had already

done and get the color right because

right now the color doesn't actually

match

[Music]

then I also need to do the bathroom

panels because those let in quite a bit

of water and then that should be it

as far as wood replacement goes only to

barely check a lot of a teak fixtures

and make sure that there's no hidden

molding issues going on but once that is

done I should be in pretty Bristol shape

[Music]

[Music]