This is part II of the Chinese diesel heater installation in my little sailboat. I leave most of the fiddling around in the video's as you can maybe understa...

Closed Captions (CC):
last episode we partially unbox the five

kilowatt Chinese DS Lisa's car I just

didn't show the fuel tank the fuel

filter and the exhaust muffler then we

saw me manhandle some fiberglass and

resin to make a little photo for the

mounting plate of the diesel heater

itself and then we ended with retinal

with resin the support

[Music]

okay hello guys I'm very happy that I'm

back at the boats

there is Ehrlich in a half like 10 days

in between between the last time that I

was it and now just because I poured so

much and I have to stay home for the

post-order companies and stuff last time

that you remember I and probably you

remember because for you that's only a

couple of seconds ago for me that is 10

days in between but last time I stopped

making this part I was work for nothing

you get this from the store for free so

basically I shouldn't have done that but

yeah I tried it now now I know that it

doesn't really make it really strong

it's stiff though but it's not very

strong now I just bought these two

bottles and that's hardness and paint

this white paint because I picked up all

the cabinets here the doors the lockers

everything and I don't like it one bit

now we have two component paint and I

hope that's gonna be better this is pure

white I kept my tickets one liter

fifty euros for one liter you can do 12

square meters with this now it's really

stormy it's like 50 50 knots of wind I

find it very wasteful that I every time

it I glad that I need to use such a nice

roll know about the really cheap one it

was the last one also about this this

little paint brush if there is a lot of

noise if the build outside complained to

say because of the sea I gonna fix

myself some polyesters

I'm gonna sacrifice one spoon for that

[Music]

serious fears gusty that's storm okay

there is some serious rent

there are guests of 80 kilometers like

45 knots 50 knots

normally really really

this is normally very stable water

but

really great

they're actually raised here everything

smells and states like so it's new

trendy that are actually raised to you I

would love to tell now but it's a little

bit dangerous

well

grazie

crazy stuff guys crazy stuff you can see

it's not even slightly bent

this is like sometimes seriously

- three and I added an extra sheet all

the way over there like the red one

normally that's like forbidden dough

because you had it's not my space but it

stormy that's first wet and everything

oh it's dusty

okay stop touching it because it's

starting to get really sticky and then

it's easy to ruffle everything

apparently I lost the video portion I'm

not as likely glassed-in a little

support beam and here you go there the

next day

let's shake yeah I need to do and that

grab that I left over but yeah it is

where this didn't go as expected

[Music]

[Music]

[Applause]

I'll clean it up a little bit it's not

perfect I know this looks really really

new

but I think it's gonna hold great key

goods or at least good enough

[Music]

okay guys these are foreign amount the

exhaust here I still need to tighten it

a little bit better I tightened the

exhaust pipe which now I need mount to

the mufflers because that's basically

what it is

[Music]

let's touch to the muffler's but I want

that short piece on the back and nothing

is touching or hell now we can stop

thinking about where we gonna have the

heat coming in and I think I just want

to go straight through and this is the

inlet but for now it's also from made

from aluminium or something I think it's

aluminum I can use that now for the

exhaust to go outside instead of having

to the inlet pipe to go outside a couple

of hours are gonna use it without these

filters these are all the cables that

you need with fuse and to the faults we

have the exhaust the heating pipe the

inlet is okay we have the remote

connected now we need a fuel pump and

connect it to a diesel tank and that's

gonna be the next big issue there you

can see the fuel lines I think

for what I understand is that this is

the fuel line that now is the actual

fuel line is the grid return the fuel

return and this is a breathing thing I'm

gonna try to disconnect the fuel line

put in a D section even after the filter

is the original filters so this pipe can

go to the motor like it is right now and

with the D section I can divide it into

this pipe and then go to this pipe to

the device to our heaters I don't have

to cut anything I just need to write for

this section

I rock this power cable the black one

and the red one which has a fuse

connected directly to 12 volts I know

this electricity is going to be

completely renewed but for the moment it

has to be so and then the second thing

I've done I've installed the diesel pump

right here on the wall and I wrote it

all so this electric wire to wash the

pump there is one problem if we're gonna

fire this pump up for the very first

time it's gonna run dry and that's

really bad for pump we just have this

plug connecting to this plugin and

everything is connected

also the remote control also wrote it

after this wall right there

it's almost final I just gonna just fit

everything to save it exhaust let's not

find out I need to come hole in the wall

right here and you can see all the wires

there still needs to go into tube to

prevent shaving but for now I'm just

gonna plug this in and check if we have

contact let's plug it in and hope for

the best

if everything is done right

seems that we have connection so we have

a time of clock it's probably for some

sort of Wi-Fi remote Bluetooth kind of

things I don't know if my version has

that and then we have two device here

and the treasure there and the battery I

think that's okay oh no

testosterone-filled for the field

you pump is not doing anything the

cooler on the practice is running so

just like the just like this place a be

3.7 volts I don't know what that means

[Music]

I've no idea what that is 15 degrees we

only have 8 volts 15 degrees

the only of 8.3 volts

it's probably a little bit about the

fuel pump go now

[Music]

I don't hear anything I'm just gonna let

it run for a while now but the fuel pump

is going

like off

probably because the fuel pump is not

getting fuel

Arif zero one let's read the manual I

connected it directly to the battery

because my voltage see my pure books was

always going down to up to 9 volts 80

and sometimes and it's just not enough

it's just shut down now it stays above

12 so that's nice the arrow on the fuel

pump that sets the arrow set to the

device I tried it but Matic the pump is

a little bit different the arrow on the

pump is right so this drawing is correct

the wire connection is pointing to the

device actually but I disconnect it and

I set for the spray okay I primed it and

I don't know if I already said it but

you need to press the down button and

okay button and then first release the

okay button and then the down button and

then you see the prime pump icon and

then you can press up to start it and

down to stop it and I've seen the diesel

going all the way I turn it off and now

I hope we get ignition and heat we do

have ignition because we have smoke out

of the exhaust for sure so there is

diesel being burns and that's quite a

bit so now when you check you the

outside my home is open

okay the exhaust pipe is getting warm

that's for sure

everyone getting heat yep

oh the exhaust is getting really old

and really really hope

getting eysan cozy I'm going to turn it

off

the first blow

well that exhaust is extremely hot

extremely hot