after fitting the Damper plate the banging noise was still their. PLEASE LIKE AND LEAVE A COMMENT https://www.ko-fi.com/celticsailing

Closed Captions (CC):
[Music]

hi all I hope you all had a lovely

summer out sailing got out a few times

myself this year really enjoyed it but

anyway back to the videos and in this

one I'm replacing the damper plates

between the engine and gearbox it

attaches to the flywheel I was able to

source new damper plate R&D I had to

modify it slightly to fit onto the

flywheel relocate mounting holes and a

couple of spacers but I'm glad to say

this summer there was no noise as bangs

or crashes coming from the engine

I'm gonna keep this one as a spare

there's a little bit of life left and

it's always handy to have a spare but

I've modified this RM I know or ordi to

fish so it's crackin whenever you're

replacing any parts on an engine

cleanliness is next to godliness and

because the flywheel is so awkward to

get to I decided to add the Loctite

first to the bolt holes instead of up to

the bolts just so I could make sure all

the bolts had locked tight on them

because this flywheel does spin at a

high rpm and the damper plate is only

bolted on I'm always worried I'd tread

the bolts so I I used the allen key just

to start them off and then use my

ratchet to tighten them up at the end

because there's nothing worse than

shredding a bolt on a flywheel all these

lessons have been learned by making the

mistakes but I hope this advice had

helped you and prevent you from making

them

and once again the cleaning after every

stage is done I like to clean it's handy

because you check bolts and see Vettes

loose and on a side note I did find out

one of my bands were broken on this day

oh yeah make sure you've got good

ventilation oh my god I was high as a

kite after doing this

this is where you wish you turn on a

pair of hands

laughter doesn't matter anyway I could

only just flip myself into the engine

bay

it's a fiddly job but you have to stick

with it and you get it done you'll

notice here I was able to add Loctite to

the poles for the bell housing instead

of into the balls there's a method for

every possible

[Applause]

and a Koosh try finally attached job

done everything in line and just praying

there's no more rattles or bangs sorry

no picks women on beach here after

testing Denise was still there I was

heartbroken but I let you into a secret

I did figure out what was wrong